Download printable leaflet below
45m.pdf

• Thermic Celloclim
• Thermic Celloflex
• White Opaque Plastic
• Cladding Rails
• Additional Hoops
• Ground Pins
• Netted Doors
• Repair Tape
• Anti Hotspot Tape
• Weed Control & Frost Protection
• Richel Black Netting
• Strong Gauge Green Netting
• Steel Clips

• It is always advisable, from our experience to have 2 door openings, one at each end not only for wind control but for humidity control within the tunnel for better production. We find the netting covering on the doors gives good humidity control.
• If our metal cladding rails are used it is advisable to concrete in the steel pins.
• Assembly can be arranged directly with our technicians if required.
• Several types of ground covers are available for weed control and advice on raised bed production. (See Accessories)
• For home production, the most common lengths are 6m or 8m long. Remember they can be extended at a later date when replacing plastic so the decision is not final
• Allow at least 1m on each side of the structure for digging in the plastic
• Position in the sunniest location in the garden, ideally running north to south for maximum light.
• On sunny days do leave the door open for maximum ventilation if the netted door option has not been used.
• Do tension the plastic as much as possible to ensure a long life.
• Anti hot spot tape is NOT recommended when used to lengthen the life of the plastic as it appears to shorten it. (In hotter climes they paint a white line on the OUTSIDE of the plastic to reflect the sunlight away.) Anti hot spot tape is recommended only where homemade steel has rough edges, so that, in assembly, when the plastic is pulled over the structure, it doesn’t rip.
• Further queries do contact us.

If you need any further details on this product please let us know and we will respond as soon as possible.

Enjoy this post? Share it with others.